New information about “Charging the Scooter”, as of 11 January 2017 * IMPORTANT NOTE: ONLY THE STATUS LED ON THE SUPPLIED UNIT SHOWS THE LADESTATUS! The battery LED, which is on the scooter, gives no information about the charging status or whether the charging process is finished! How to charge the iconBIT Smart Scooter correctly and when do I notice that the charging process has been successfully completed?
Step 1: Ensure that the charging connector is clean and dry, and that there is no dust or dirt inside the charging connector.
Step 2: Connect the charging cable to the power supply. Then insert the power supply into a socket (100V ~ 240V, 50, 60 Hz). Check whether the status LED of the power supply is “green”.
Step 3: Connect the adapter of the power supply to the charging input of the scooter. The status LED of the supplied power supply now lights up “red”. As soon as the charging process has been successfully completed (approx. 2-3 hours), the status LED of the power supply is again “green”.
Step 4: Please disconnect the charger from the scooter and from the socket.
Note: If the scooter is switched on, the battery LED on the scooter lights up “orange”. If the scooter is switched off, the scooter’s battery light does not light up – this has no effect on the charging process! The charging process or charging status is indicated only by the status LED, which is on the power supply.